Effects of two oil dispersants on phototaxis and swimming behaviour of barnacle larvae

The effects of two oil dispersants (Vecom B-1425 GL and Norchem OSD-570) mixed with diesel oil on the survival and behaviour of the stage II nauplii of the barnacle Balanus amphitrite were investigated. The 24 and 48-hour LC50 values for Vecom B-1425 GL:diesel mixture were 514 and 48 mg 1-1 respectively, while respective values for Norchem OSD-570:diesel mixture were 505 and 71 mg 1-1. Under sublethal concentrations, increased levels of the dispersant:diesel mixtures caused a reduction in phototactic responses. Balanus amphitrite nauplii failed to exhibit phototactic responses when exposed to Vecom B-1425 GL:diesel mixtures of 400 mg 1-1 and higher for 24 hours. A longer exposure time of 48 hours further reduced the Lowest Observable Effect Concentrations (LOECs) to 60 mg 1-1. The LOECs for Norchem OSD-570:diesel mixtures under exposure periods of 24 and 48 hours were 400 and 80 mg 1-1 respectively. The curvilinear velocities (VCL) and straight-line velocities (VSL) of the stage II nauplii ranged from 0.7-1.1 and 0.2-0.4 mm s-1 respectively. Increased concentrations of dispersant:diesel mixtures caused a significant change in the curvilinear and straight-line velocities. Both oil dispersants, dispersant:diesel mixtures of 20 to 40 mg 1-1 caused significant increases in VCL, but no significant change in VSL. Dispersant:diesel mixtures of 100 mg 1-1 and higher resulted in a reduction in VSL for both dispersants. ©1997 Kluwer Academic Publishers.link_to_subscribed_fulltex

Seismic characterization and reconstruction of reference ground motion at accelerometric sites of the Italian national accelerometric network (RAN)

We present a field procedure that has been extensively used in Italy to characterize local seismic response at accelerometric sites and to retrieve ground motion at reference soil conditions by deconvolution analysis. To allow a generalized application to large areas where borehole data are generally lacking or inadequate for the seismic characterization for soils down to the reference seismic bedrock, cost-effectiveness of the considered procedures is a main issue. Thus, major efforts have been devoted to optimize available information and exploit fast and cheap surface geophysical prospecting. In particular, geological/geomorphological survey and passive seismic prospecting (both in single- and multi-station configurations) were jointly considered to reconstruct seismo-stratigraphical site conditions. This information was then used to feed numerical modeling aiming at computing the local seismic response and performing a deconvolution analysis to reconstruct ground motion at reference soil conditions. Major attention was devoted to evaluate and manage uncertainty involved in the procedure and to quantify its effect on final outcomes. An application of this procedure to a set of sites included in the Italian Accelerometric Network is presented